TSA7010 V2 - Digital Bluetooth Audio Receiver Board(I2S+DAC)

This digital Bluetooth music receiver connects to the Line-In or Aux input on your home audio system. You can then stream audio from your Bluetooth-enabled cell phone or mp3 player to your home audio system. Enjoy the convenience of having your music source in the palm of your hand and listening to it through your home stereo.

It comes with an AudioB I2S V4 Bluetooth module, with I2S digital output. Music resampling frequency is 48KHz. It supports Apt-X, and it is based on QCC3031. The base board is a DAC(PCM5122PWR) board, which converts the I2S digital audio to analog output.

Note: TSA7010 can automatically detect the Aux in/Line in Audio input. Bluetooth Audio source has higher priority. When Bluetooth audio is paused, or Bluetooth is disconnected. TSA7010 will output the Aux in/Line in audio.

Note: TSA7010 used AudioB I2S V4 Bluetooth module, it's an I2S master. If you buy AudioB I2S V4 separately, it's an I2S slave; you need to change it to a master if you want to make it work on TSA7010 V2

How to use:

Single module

1. Double click S1, module into pairing mode. (Voice: Pairing, blue LED flash 2 times per cycle.)
2. Now, your smartphone will be able to find a new Bluetooth device whose name is "AudioB I2S", and connect it. (Voice: Pairing successful, blue LED flash 1 time per cycle.)
3. You can play music now.

Party connection (multiple modules can be connected together)

• transmitter module

1. Power up module, blue LED flashes 3 times per cycle.
2. Double click S1, module into pairing mode. (Voice: Pairing, blue LED flash 2 times per cycle.)
3. Now, your smartphone will be able to find a new Bluetooth device whose name is "AudioB I2S", and connect it. (Voice: Pairing successful, blue LED flash 1 time per cycle.)
4. You can play music now. If you only use one module, you don't need to do the following steps.
5. Single click S1, the module will switch between transmitter mode and receiver mode. Stop clicking when you hear the voice: broadcast mode, it means the module is set to transmitter mode, the Red LED is ON.

• receiver module

1. Power up another module, blue LED flashes 3 times per cycle.
2. Single click S1, the module will switch between transmitter mode and receiver mode. Stop clicking when you hear the voice: broadcast audio enabled, it means the module is set to receiver mode. Green LED is ON
3. Press and hold the S1 button about 1 second on the transmitter module, press and hold the S1 button about 1 second on the receiver module, the transmitter module will auto searching (30 seconds) receiver module. Both the transmitter and receiver modules will be connected. (Voice: pairing successful)
4. The receiver module will have music out now.
5. If a new module wants to join as a receiver, repeat step1~step3 on the new module.
6. If a receiver wants to quit, click the S1 button on that module to set it into transmitter mode.

If you connected the RGB Matel Push Button with cable to the module, it works the same as the S1 button on the module.

Features:

• Size: 42*32*11mm
• Bluetooth 5.0
• Apt-X supported
• Stereo receive
• Effective transmission distance: 10-15m
• Micro USB female port for powering the receiver from any USB power source(5VDC)
• Compatible with all Bluetooth devices that support media audio, including iPhone

Documents:

• How to change the BT name
• Bluesuite2.5.0
• Firmware