Tinysine
TSA1701 Audio DSP Board
TSA1701 Audio DSP Board
Couldn't load pickup availability
The TSA1701 is a complete audio digital signal processing module. The main DSP chip on this module is ADAU1701. The application range is active loudspeaker concepts (digital 3 way 3 unit, 2 way 2 unit crossover, bass enhancement, etc.) and transformation from 2.0 to 2.1 is realized. It also has four potentiometers and with default program loaded. Customers can adjust the gain, bass, midrange and treble.
It also has a debug port for Sigima Studio,and user can program this module with our USBi programmer to get more functions that include equalization, crossover, bass enhancement, multiband dynamics processing, delay compensation, etc.
Pins define:
| Port name | Pin name | Direction | Description |
| External Potentiometers port | 3.3V | Power Out | 3.3V Output |
| A_ADC1 | Analog In | Treble control | |
| A_ADC2 | Analog In | Midrange control | |
| A_ADC3 | Analog In |
Bass control |
|
| A_ADC0 | Analog In | Gain control | |
| GND | - | ||
| Audio Input | GND | - | |
| ADC1 | Analog In | Right channel | |
| ADC0 | Analog In | Left Channel | |
| Audio Out1 | GND | - | |
| DAC0 | Analog Out | Left Channel | |
| DAC1 | Analog Out | Right channel | |
| Audio Out2 | GND | - | |
| DAC2 | Analog Out | Left Channel | |
| DAC3 | Analog Out | Right channel | |
| Tinysine AMP sub control Port | Line Out0 | Analog Out | DAC0 |
| Line In0 | Analog In | ADC0 | |
| GND | - | ||
| GND | - |
Warning: You need to disconnect the soldering pads on the board back side when you connect external potentiometers. Or the ADC port may be burned. Potentiometers value: 1Kohm-100Kohm.
Here is our Potentiometer Kit
TSA1701 control our 2.1 channel amplifier board subwoofer channel
TSA1701 works with stereo amplifier board
Features:
- Size: 7.2cm x 5cm
- 28-/56-bit, 50 MIPS Digital Audio Processor
- Audio out output level: 0.9Vrms
- Audio input signal range: 2Vrms
- Input resistance: 20Kohm
- Fully Programmable with SigmaStudio Graphical tool
- 5V micro USB or DC9-30V Power input
- 4 pins cable included
Documents:
