2 x 50 Watt Class D Bluetooth Audio Amplifier - TSA3610
2 x 50 Watt Class D Bluetooth Audio Amplifier - TSA3610
This is a 2x50W audio amplifier which integrated Bluetooth 4.0. It has perfect class-D architecture and each channel has 50W power output. This audio amplifier can be powered by any DC12V-24V power supply. It can be used to drive any 4Ω or 8Ω passive speakers. There is one button and a knob on the front panel. The button is for power on/off. When you use the volume knob to adjust the audio volume, it will also automatically synchronize volume with your iPhone.
It's perfect for your Hi-Fi application, the audio source can be RCA input or Bluetooth. You may wish to pair with a mobile phone or a computer (etc). Power the amplifier board. Use your phone or PC (etc) to search for a new Bluetooth device. The module will appear as "TSA3610". You don't need a PIN, pair it and then you can play music.
- TSA3610 supports both Bluetooth and RCA audio input, Ultra low background noise and perfect audio quality.
- Audio volume knob can adjust both Bluetooth and cable input audio volume. Very convenient and easy to use.
Please set the RCA input enable/disable switch to Bluetooth position when you only use Bluetooth
Specification:
TA = 20℃, fIN = 1 kHz sine wave, RL = 4Ω. (Unless otherwise stated)
Parameter |
Condition |
Min |
Typ |
Max |
Supply Voltage (VDC) |
- |
12 |
21 | 24 |
Idle Power |
SD Floating |
- |
1.3W |
2.5W |
Standby Power |
SD Connected to GND |
- |
0.1W |
0.3W |
Maximum Current |
100W @ 4Ohm |
- |
5.29A |
- |
Efficiency |
50W @ 4Ohm |
87% | - | 92% |
Minimum Load Impedance |
3.2Ω |
|||
Switching Frequency |
SD Floating |
- | 394KHZ | - |
Gain | 24dB | 25dB | 26dB | |
Input Sensitivity(RMS) |
@4Ω, 50W, 1KHz |
- | 808mV | - |
Input Impedance |
- | - | 22KΩ | - |
Output Power |
@4Ω THD+N 1% |
- | 36W | - |
@4Ω THD+N 10% |
- | 50W | - | |
Bandwidth @ ±3dB |
@4Ω |
20Hz |
- | 20KHz |
THD |
@4Ω, 1W, 1KHz |
- |
0.0299% |
- |
@4Ω, 10W, 1KHz |
- |
0.073% |
- |
Features:
- Dimension: 12cm x 10cm x 4cm
- Weight: 420g
- Bluetooth audio volume knob
- Working voltage: DC12V-24V
- Bluetooth 4.0
Documents:
- How to change the BT name
- How to enable BT password
- How to change Bluetooth audio gains
- How to restore bluetooth settings
Share
...and thus sounds like a nice small, little amp. Which I use for some of my DIY projects. Sounds good, easy to connect, no real problems with problematic chassis. Could have a somehow more attention-catching power-LED. Means: I sometimes forget to switch it off...